Discover how Qube Technologies supports businesses to reduce emissions and create new opportunities.
Case Studies
How Continuous Monitoring and SCADA Data Connected Truck Loading Events to VRU Shutdowns
Repeated emission spikes during truck loading were traced to oxygen entering the vapor recovery unit and shutting it down. Rerouting the vapor line fixed it.
Continuous Monitoring at an Unlined RNG Pond with Clay Bottom Leads to 67% Emissions Reduction
Diffuse methane emissions at an unlined RNG lagoon evaded standard walking surveys because the gas passed through soft soil before surfacing at low concentrations. Qube's continuous monitoring detected the leaking seams, allowing targeted soil compaction that lowered measured emissions by 67%.
Rapid Leak Detection by Continuous Monitoring Results in 87% Emissions Reduction at a Lined Biogas Lagoon
Monitoring caught a persistent leak from a broken weld on a lagoon cover that walk-by inspections never found. Repairing it cut emissions by 87 percent.
How Continuous Monitoring Caught Flare Combustion Issues That Temperature Monitoring Missed
Emissions were climbing even though the flare's temperature looked normal, tracing back to a blower without proper feedback control. Fixing the airflow balance brought emissions back down.
How Qube’s Continuous Monitoring Caught a Regulator Malfunction and Saved $9,000
A failing regulator, a leaking hatch, and corroded seals were compounding emissions before equipment damage set in. Catching it early avoided about $9,000 in costs.
Continuous Monitoring Verified Upgraded Pneumatic Controllers Drove 80% Reduction in Methane Emissions
Colorado's rules pushed an operator to swap gas-driven pneumatics for compressed air ones, and monitoring confirmed an 80 percent drop in emissions afterward.
Rapid Methane Leak Detection at a Wellsite Separator
Real-time alerts and source localization caught a high-volume separator leak that would otherwise have gone unnoticed over a weekend, and it was repaired within the week.
How Qube’s Automated Alarms Caught a Cow at the Wellsite
A methane alert at a Colorado wellsite traced back to a cow that bumped open a valve. Crews shut it in and fenced the area to prevent it happening again.
How Qube’s Continuous Monitoring Found Leaking Level Controllers After Well Restart
A Colorado well pad restart triggered a large methane release, traced to leaking level controllers and thief hatches and repaired within a day.
How Qube Helped One Permian Operator Detect Offsite Emissions
A methane spike at a Permian site turned out to come from a neighboring gas plant, saving the operator an unnecessary inspection.
QB Energy and Qube Technologies Resolve Thief Hatch Leak Leading to 97% Emissions Reduction
An alert at a QB Energy tank site led crews to a leaking thief hatch that a visual inspection had missed. Resealing it cut emissions by 97 percent.
Driving Leak Detection in RNG: Case Studies from Early Deployments with Maas Energy Works
After a strong pilot, Maas Energy Works expanded monitoring to 24 more dairy digesters, and these early results show faster leak detection and more gas retained.
Qube Technologies Leads in Continuous Methane Monitoring: Independent Trials Confirm Best-in-Class Landfill Performance
Independent FluxLab and EREF trials at a working landfill found Qube the most accurate continuous monitor tested, even under tough weather conditions.
Methane Emissions Management Success Story: Birch Resources + Qube Technologies
Birch Resources used continuous monitoring to respond immediately to an unexpected flare outage, even as satellite surveys were still catching up.
Qube’s Continuous Emissions Monitoring Detects a Produced Water Spill in Real-Time
A methane alert that looked routine turned out to be a produced water spill from a failed manifold, caught and contained before it spread.
Rapid Leak Detection Prevented Potential Revenue Loss of $200,000 at Biogas Site
A midnight tear in a biogas lagoon was caught and fixed the next day, saving Roeslein Alternative Energy an estimated $200,000 in lost product.
Qube's Continuous Monitoring Verifies 60% Reduction in Methane Emissions from Pneumatic Device Upgrades
A methane alert that looked routine turned out to be a produced water spill from a failed manifold, caught and contained before it spread.
Diagnosing Excessive Emissions From Faulty Valves at a Permian Central Tank Battery: 63% Emission Reduction
A sudden emissions jump at a Permian tank battery was traced to faulty valves under high line pressure. Fixing them cut emissions by 63 percent.
Rapid Detection of Fugitive Leak from Stuck Thief Hatch at Well Pad
Monitoring at a Canadian well pad flagged above-baseline methane at the tank area, leading crews straight to a leaking thief hatch.
Optimizing Process Heater Efficiency Through Continuous Emissions Monitoring in British Columbia
A British Columbia facility tracked down excess process heater emissions, cutting monthly methane by 76 percent and carbon monoxide to zero.